Echo1 stag 15 m4 mag problem

moose3055 · 01-09-2010, 06:49 PM

Hi guys, new here and have a problem. Just bought my son the Echo1 stag15 m4 2010 verison. Problem is this, I can load and wind up the magazine. When I insert the mag, the mag unwinds. Then when I remove the mag, 1 or 2 bbs will fall out or be on top of the mag. Now this happens when the bb's get low in the mag and I have to re-wind the mag. On the initial load, it works fine. Any help would be great.
Thanks, Moose

player · 01-09-2010, 06:53 PM

What you should do is put in the mag then wind it up. Also it is normal to have a few bbs come out when you release the mags.

old soldier · 01-10-2010, 05:56 PM

I have the same gun and the same problems, as with all my E-1 high caps. all you need is a little silicone spray (100 percent silicone ) Just spray a little or a few drops into the mag resevoir and the BB loader hole. What i do is place a few drops into both spots and then add a few bb's and wind them through the mag dump them out and do it again. after that is done fire a few of those bb's (carefully) and this is all you will need to do. the loss of 2 or 3 bb's when you drop the mag is normal and expected. This same problem will occure again or you will start to miss feed bb's into weapon( firing weapon and no bb's coming out) When this happens it is time to lube the magazine all over again. It happened like i said with all my E-1 high caps and i have a lot and a large assortment and it happens to everyone of them at times. A little lube solves amost all feeding problems and magazine problems...