Electrical problem

l96ninja · 06-17-2010, 02:37 PM

I just finished rebuilding my P90, and after plugging in the battery and taking a shot, realized that the piston is half "cocking" along with the air nozzle. I promptly went it and released the motor, sending everything back to its proper place. Upon trying again, the same thing happened. My gearbox seems to be in order, so I figured this was a motor issue. However, I then noticed that when I held down the trigger (at this point the piston was half cocked again) my fuse would glow red! Does anyone know what the problem may be?

**GeneralPoraboo** · 06-17-2010, 04:46 PM

Same thing was happening to my buddys G36, no clue

sarin99 · 06-17-2010, 05:26 PM

So by half cocked, you mean it only goes halfway back? If so, check your shimming. And if you hold down the trigger when it is stuck, you are risking melting your wiring.

l96ninja · 06-17-2010, 05:29 PM

Mods can close this, I found the problem to be a stripped piston. Thanks for the help!