A&k M249 Mk2

xandrew245x · 02-09-2010, 07:04 PM

I own a A&K M249 MK2 and i was wondering if its possible to take the bipod off and put a front grip on it. The bipod is attached to the front right under the barrel, not mounted to a ris system or anything. I saw a pic of a saw on the forums here and it looked like the MK1, but the bipod was taken off and a grip put on. If anyone could point me in the right direction that would be great, thanks.

CaribouLou45 · 02-09-2010, 07:13 PM

Here you go: http://www.airsoftpost.com/product_i...ducts_id=28784

And you don't need to take the bi-pod off.

xandrew245x · 02-09-2010, 07:52 PM

Tyvm

Oh yeah, another question, anyway to get a reflex or red dot mounted on it?

CaribouLou45 · 02-09-2010, 08:07 PM

Yes. Here you go:

Cheapest: http://www.airsoftpost.com/product_i...ducts_id=25789

Nicest: http://www.airsoftpost.com/product_i...ducts_id=28995

Another thing you can do is just dremmel out holes to mount a rail at the bottom of your gun now and on the feeding tray.

xandrew245x · 02-09-2010, 08:27 PM

The cheaper one you linked, does that just mount over top of where the pre-existing sites are? or how does that work?

CaribouLou45 · 02-09-2010, 08:41 PM

Both are the same thing; they are feed covers. The feeding cover that the sights are attached to comes off and this one goes on instead.

xandrew245x · 02-09-2010, 08:44 PM

Ok, thanks for clearing that up