Ok heres the scoop. Im going to be getting the TM MP5-SD6 but i want to be able to mod it so the batteries go into the back because i have a full stock for an MP5. So I remember when i would take the stock off the back of my UTG MP5 A4/A5 i could see the two of the wires, One coming out of the mech box, And then the one that would go into the extened cable so it would be able to feed into the forgrip. So i was thinking about this. On the TM SD6 will I be able to see the two cables from the mech box and the extended cable? Also will I be able to easily remove the extened from the mexh box? And everybody i already have an extened cable with a fuse on it from my UTG.
Help would be appreciated! :D
Thanks,
kevin
__________________
Quote:
Originally Posted by Rjaniz
Last thing we need is 15 Australian generals running around.
Well i got it today, and put my UTG full stock on the back, And also put the MP-38 extension wire on to the back for the large battery pack to fit in the back of the gun well here's the pictures: http://www.freewebs.com/airsoft_guy/ .
The pctures of it are in moded gun/guns. Just make sure to scroll down and look at the box! :D
__________________
Quote:
Originally Posted by Rjaniz
Last thing we need is 15 Australian generals running around.
Ya i just shot with a fully charged battery it and WOW THIS THING SHOOTS FAST!!!!!!! Is it because im using a large battery in a gun that takes a mini?
__________________
Quote:
Originally Posted by Rjaniz
Last thing we need is 15 Australian generals running around.
Ya i just shot with a fully charged battery it and WOW THIS THING SHOOTS FAST!!!!!!! Is it because im using a large battery in a gun that takes a mini?
Nope. The size of the battery (in mAh) only means it will last longer.
Increasing the voltage to a 9.6v battery will make it shoot faster, so if you use one of the batteries that came with your UTG, it will shoot faster.